Author Topic: EOS Slipping Main Wheel fix  (Read 2161 times)

0 Members and 1 Guest are viewing this topic.

Offline Funtera

  • Club Member
  • Serious User
  • *****
  • Posts: 963
  • Gender: Male
    • View Profile
    • Mach Loop
EOS Slipping Main Wheel fix
« on: April 15, 2017, 02:55:49 AM »
My 50D suddenly developed an issue last time in wales, I'd spin the Wheel for the Shutter speed and it'd spin without gripping.

I did some research and found an article and it suggests using Superglue (  HERE ) ... however I thought this was a bit harsh (bad dreams of gluing the damn thing to the body) and a couple of others in the Comments had the same thoughts. Someone suggested Rubbing Alcohol so I read a bit more into it.

Needless to say I picked up some Isopropyl Alcohol ( only 70% proof but not drinkable :-( ) and after pulling the Wheel out a bit and dabbing some on the Main Dial, I spun it a few times and it slipped completely , now I'm thinking I've messed up Big Time but after a couple of minutes the Alcohol and grease/gunk it's "eaten" had evaporated and it's perfect !!

I know this ain't the normal thread for in here but if this helps someone else save £179 from Canon to replace the Dial or whatever from Lehmans .. I've done some good!

EOS50D & EF 70-300mm IS USM Combo
Proud Owner of Haynes Manual H4831 Vulcan B2 Signed by Martin Withers